PX2122
High Output Dual 12-inch Two-Way
Dual ND2 2" Voice Coil, 1" Exit Neodymium Compression Drivers. Dual DVX3121 12” LF Transducers with Forced Air Cooling. Long-Throw 45° x 30° Rotatable Coverage Pattern. 1000W Continuous (4000W Peak) Power Handling. Biamp Only Operation. Very High Sensitivity, 138 dB Maximum SPL. Integral Rigging Points for Eyebolts or Optional Rigging Kit. Designed to be Arrayed with two or more PX2122.
Specifications
| Frequency Response (-3dB) | 80 - 15000 Hz |
| Frequency Response (-10dB) | 60 - 19000 Hz |
| Sensitivity 1W/1m | 102 dB |
| Max. SPL/1m (calc); half space | 138 dB |
| Coverage (nominal -6dB) H° | 45 ° |
| Coverage (nominal -6dB) V° | 30 ° |
| Rotatable Horn | Yes |
| Low Frequency Power Handling (continuous/program/peak) | 1000/2000/4000 Watts |
| High Frequency Power Handling (continuous/program/peak) | 80/160/320 Watts |
| LF Transducer | (2) DVX3121, 12 in (305mm) Driver |
| HF Transducer | (2) ND2-16, 2 in (50mm) Diaphragm Compression Drivers |
| LF Nominal Impedance | 4 Ohms |
| HF Nominal Impedance | 8 Ohms |
| Enclosure Material | 18mm Plywood with Black EVCoat |
| Grill | Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo |
| Color | Black |
| Flying | Optional |
| Input Connections | Parallel Neutrik® NL4 |
| Outdoor | No |
| Chassis Size | 12 inches |
| Internal Crossover | No |
| Speaker Type | Fullrange, Mid-High, Two-Way |
| Weight Net | 50.1 kg ( 110.45 lbs ) |
| Dimensions (HxWxD) | 1219 x 457 x 445 mm (47.99" x 17.99" x 17.52") |
Related Press Releases
Downloads
Related Products
CP3000S
Electro-Voice’s Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, it is both powerful and lightweight, at only 17.96 lbs (8.15 kg). The CP3000S is state-of-the-art for all kinds of applications. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's reliability and its pleasing, rich sound make it the first choice for all mid- and hi-range speaker cabinets.
Dx38
2-in/4-out loudspeaker processor 115 dB dynamic range, for highest audio performance 48-bit filter algorithms 24-bit A/D and D/A conversion Real-time control and configuration via front panel or PC interface with RACE software supplied RS-232, MIDI interfaces are standard, RS-485 bus for networking optional Contact-closure interface optional.
PX2181
Dual Horn-Loaded DVX3180 18” LF Transducers with Forced Air Cooling. 1000W Continuous (4000W Peak) Power Handling. High-Efficiency Horn-Loaded Design. Dual/Parallel Mode Selectable. Very High Sensitivity, 141 dB Maximum SPL. Integral Mounting Points on Rear Panel for Optional Wheel/Caster Kit. Enclosure is Stackable in Both Horizontal and Vertical Orientations.