RE-1 Receiver Dual
CDR-1000 Dual RE-1 Receiver
The CDR-1000 includes all the great features of the CSR-1000 single receiver, like Advanced ClearScan™, but also some very unique exceptions. The CDR-1000 has antenna pass through connections that allow a user to connect three duals (six receivers) to two antennas. All that, and the cables are included with each unit. No extra distribution unit or parts required. The CDR-1000 also has an IEC Cord internal switching power supply.
Specifications
| Controls | On/Off, Menu, Set, Up, Down, Audio Output, Mic/Line, Headset channel and volume |
| Displays | Group/Channel, Frequency, Label, Diversity, AF meter, RF Meter |
| Connector Type | 1/4" unbalanced |
| Connector Type | 3-pin XLR |
| Connector Type | USB Type B |
| Antennas | External 1/2 wave detachable |
| Antenna Output | TNC Left and Right |
| Powerered Antenna Inputs | 12 VDC Phantom |
| Audio Frequency Response | 30Hz - 15 kHz +/-2dB |
| Balanced Line Level Output (RMS Adjustable) | 10 - 100 mV |
| Diversity | DSP SecurePhase True Diversity |
| FCC Type Acceptance | Approved under Part 15 |
| Number of channels | 950 possible (programmable in 25kHz steps) per band |
| Power Requirement | 90 - 260 VAC 50-60Hz |
| Squelch | Tone Code plus Amplitude |
| USB Monitoring & Contol | RE-OneLink Software |
| Case Material | Steel |
| Dimensions (HxWxD) | 43.7 x 406.4 x 305 mm (1.72" x 16" x 12.01") |
Related Press Releases
Accessories
APD4+
The APD4+ provides diversity antenna and power connections for up to four RE-2, RE-2PRO, or RE-1 CSR-1000 receivers. By cascading the APD4+ up to 16 channels of receive can be run from just two antennas. With the CDR-1000 RE-1 Dual receiver up 24 channels of receive can be run from two antennas and just one APD4+. All unused antenna outputs must be terminated with a TP-2 termination plug.
LPA500
The LPA500 is a Log Periodic Antenna that provides 5dB of gain in the direction it is pointed. A microphone stand adapter and universal mounting clamp are included as well as a 10 foot antenna cable.
UAA500 Antenna Ampifier
The UAA500 amplifier can be used to make up for signal losses in long runs of coaxial cable. The UAA500 features selectable 3dB or 10dB gain settings, Green LED on indicator, and runs off of phantom power from the APD4+ splitter or the CDR-1000 Dual RE-1 Receiver.