QRx 212/75
QRx Series Loudspeaker System
The QRx 212/75 is a dual, 12-inch, two-way loudspeaker system with 600-watt continuous - and 2,400-watt peak - power handling.
Key Features: BIampable with 600-watt - 2,400-watt low-frequency and 75-300-watt highfrequency l DH7 three-inch, voice-coil, titanium compression driver coupled with 75 degree x 50 degree, asymmetric, Constant Directivity horn aimed downward at 10 degrees l Horn is fully rotatable for desired coverage at any orientation l Ring-Mode Decoupling delivers rich, pure vocal reproduction and smooth, accurate mids and instrument reproduction.
The system is equipped with L-track rigging on the top and bottom of the enclosure, and is shipped with four Ancra single-stud fittings. The QRx features an enclosure built of 13-ply, void-free, grain-oriented, birch plywood finished in Futura, a baked-on, polyurethane finish that is very rugged and durable. The components are protected from damage by a 16-gauge, steel grille with foam backing. Available in black or white
Key Features: BIampable with 600-watt - 2,400-watt low-frequency and 75-300-watt highfrequency l DH7 three-inch, voice-coil, titanium compression driver coupled with 75 degree x 50 degree, asymmetric, Constant Directivity horn aimed downward at 10 degrees l Horn is fully rotatable for desired coverage at any orientation l Ring-Mode Decoupling delivers rich, pure vocal reproduction and smooth, accurate mids and instrument reproduction.
The system is equipped with L-track rigging on the top and bottom of the enclosure, and is shipped with four Ancra single-stud fittings. The QRx features an enclosure built of 13-ply, void-free, grain-oriented, birch plywood finished in Futura, a baked-on, polyurethane finish that is very rugged and durable. The components are protected from damage by a 16-gauge, steel grille with foam backing. Available in black or white
Specifications
| Frequency Response (-3dB) | 50 - 15000 Hz |
| Frequency Response (-10dB) | 43 - 18000 Hz |
| Sensitivity 1W/1m | 102 dB |
| Max. SPL / 1m (calc) | 136 dB |
| Coverage (nominal -6dB) H° | 75 ° |
| Coverage (nominal -6dB) V° | 50 ° |
| System Power Handling (continuous/program/peak) | 600/1200/2400 Watts |
| Low Frequency Power Handling (continuous/program/peak) | 600/1200/2400 Watts |
| High Frequency Power Handling (continuous/program/peak) | 75/150/300 Watts |
| LF Transducer | (2) DL12BFH |
| HF Transducer | DH-7 |
| Nominal Impedance (Passive) | 4 Ohms |
| LF Nominal Impedance | 4 Ohms |
| HF Nominal Impedance | 8 Ohms |
| Color | Black |
| Color | White |
| Flying | Yes |
| Input Connections | Parallel Neutrik® NL4 |
| Outdoor | No |
| Chassis Size | 12 inches |
| Internal Crossover | Selectable |
| Speaker Type | Fullrange, Mid-High, Two-Way |
| Weight Net | 36.5 kg ( 80.47 lbs ) |
| Dimensions (HxWxD) | 990 x 390 x 375 mm (38.98" x 15.35" x 14.76") |
Related Press Releases
Downloads
Related Products
CP3000S
Electro-Voice’s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg), it is both powerful and lightweight. The CP3000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's combination of reliability and pleasing, rich sound make it the the first choice for all mid and hi-range speaker cabinets.
Dx38
The Dx38 is a two-in, four-out loudspeaker processor. A dynamic range of 115 dB, for highest audio performance; 48-bit filter algorithms 24-bit A/D and D/A conversion. Real-time control and configuration via front panel or PC interface with RACE software supplied. RS-232, MIDI interfaces are standard. RS-485 bus for networking is optional. Contact-closure interface is optional.
QRx 218S
The QRx 218S is a dual, 18-inch subwoofer with 1,200-watt continuous - and 4,800-watt peak - power handling.Key Features: Delivers 133 dB SPL one watt/one meter (139 dB peaks one watt/one meter) at full power l Two concert-proven, EVX180B woofers with four-inch voice-coils offer incredible fatigue-resistance and excellent long-term reliability l Usable response extends to 31 Hz l Standard versions are equipped with rear-mounted pocket wheels and handles to allow one person to comfortably move the enclosure l Standard versions also have a metal stand socket and are shipped with a 34-inch steel pole for elevating satellite speakers l Available with L-track rigging as a special order option l Rigging versions have L-track on the top and bottom plus a single-stud pull-up point on the back l Rigging versions do not come with wheels or a stand-mount.The QRx 218S features an enclosure built of 13-ply, void-free, grain-oriented birch plywood finished in Futura, a baked-on, polyurethane finish that is very rugged and durable. It is available in black or white.