Xlc118/Xlci118

The X-Line Compact Groundstack features a rigging attachment position to allow a column of an X-Line Compact Loudspeaker Array to be Groundstacked and tilted to obtain the desired sound coverage.

Dolly for the XLC Family of Products

Grid Extender for the Xlc Family of Products

The Xlc127+ loudspeaker is a component used in multiples to create a XLC line array. Starting with a minimum of four cabinets, a reasonable array size uses six to eight boxes, up to a maximum of 16 for larger arenas. The three-way axis-asymmetric design includes a single EV DL-12 low-frequency/mid-bass woofer optimized for this cabinet. Two 6.5” horn-loaded drivers in a vertical array comprise the mid-frequency bandpass. The XLC127+ utilizes two ND6 (3” voice-coil) neodymium compression drivers loaded on two Hydra™ plane wave generators. With a horizontal coverage of 120°, the XLC system accurately covers wide areas while maintaining excellent imaging and lobe-free coverage. The XLC127+ is equipped with an internal x-over for mid-bass and high-frequency to allow for either biamp or triamp operation. The Xlci version is designed for permanent installation applications with specially designed mounting hardware for easy cost effective hanging.

1,800 watts per channel at 2 ohms. Neutrik Speakon® output connectors allow use of heavy-gauge speaker wire for low-loss connections. Extremely low dynamic distortion ensures excellent sound quality. Three rack spaces.

Electro-Voice’s Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a  compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, it is both powerful and lightweight, at only 17.96 lbs (8.15 kg). The CP3000S is state-of-the-art for all kinds of applications. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's reliability and its pleasing, rich sound make it the first choice for all mid- and hi-range speaker cabinets.

Features IRIS-Net Compatable Control SystemRemote control and supervision of up to 100 amplifiers via one (or multiple) PCs running IRIS-Net software. Central supervision of all amplifiers and connected loudspeakers State-of-the-art signal processing (Filter, Delay, Level, Dynamic) Display of the acoustical response of EV speakers in realtime (RACE) Integration with life-safety systems and control of external equipment Exceptional audio performance; extreme reliability DSP version of the legendary EV P3000 amp 2 x 1300 watts into 4 ohms; 2 x 1800 watts into 2 ohms Loudspeaker outputs on Neutrik Speakon ® NL4 connectors.

2-in/4-out loudspeaker processor 115 dB dynamic range, for highest audio performance 48-bit filter algorithms 24-bit A/D and D/A conversion Real-time control and configuration via front panel or PC interface with RACE software supplied RS-232, MIDI interfaces are standard, RS-485 bus for networking optional Contact-closure interface optional.

EV engineers have defined a new group of compact line array elements, the XLC. It is comprised of three components - XLC 127+ full range with ND6-16 large format high frequency transducers and two subwoofer systems. The XLC 118 sub cabinet uses an EVX-180B, and the XLC 215 uses two DVX3150’s. Both are true sub-bass systems designed for high-level, extended low frequency output. They share the same enclosure footprint and rigging is identical to that of other XLC systems, allowing flexible subwoofer integration with full range arrays requiring extended low frequency response. With a height 1.5 times that of the XLC 127+, a subwoofer array can be flown side by side with column appearances similar to the main array using a ratio of 2 subs for every 3 full range boxes. Subwoofer systems can also be placed at the top or bottom of full range arrays for seamless arrayed 4-way system integration. Designed for use in groups of two or more the Subwoofer delivers predictability and control. Combined with an advanced integrated rigging system, one-man installations are a reality. The subwoofer systems can also be ground stacked. Ideal for applications ranging from live reinforcement to performing arts venues to houses of worship to sports facilities, XLC gives you the power to make it happen. XLC can deliver unprecedented performance, particularly in difficult acoustical environments.