RE-1 Receiver
CSR-1000 RE-1 Series Single Wireless Receiver
The RE-1 Series Wireless Microphone System is a completely programmable frequency agile system with Advanced ClearScan™, a dual band compander, rugged and powerful transmitters and many other features that make it worthy of the legendary RE label.
Specifications
| Controls | Front: On/Off, Menu, Set, Up, Down Rear: Output Level, Mic/Line |
| Displays | Group/Channel, Frequency, Label, Diversity, AF meter, RF meter |
| Connector Type | 1/4" unbalanced |
| Connector Type | 3-pin XLR |
| Antennas | External 1/4 wave detachable |
| Audio Frequency Response | 30 - 15kHz +/- 2dB |
| Balanced Line Level Output (RMS Adjustable) | 10 - 100 mV |
| Diversity | DSP SecurePhase True Diversity |
| FCC Type Acceptance | Approved under Part 15 |
| Number of channels | 950 possible (programmable in 25kHz steps) per band |
| Power Requirement | External 12 VAC 750mA in-line supply |
| Squelch | Tone Code plus Amplitude |
| USB Monitoring & Contol | RE-OneLink Software |
| Case Material | Steel |
| Dimensions (HxWxD) | 43.7 x 190.5 x 213 mm (1.72" x 7.5" x 8.39") |
Related Press Releases
Accessories
APD4+
The APD4+ provides diversity antenna and power connections for up to four RE-2, RE-2PRO, or RE-1 CSR-1000 receivers. By cascading the APD4+ up to 16 channels of receive can be run from just two antennas. With the CDR-1000 RE-1 Dual receiver up 24 channels of receive can be run from two antennas and just one APD4+. All unused antenna outputs must be terminated with a TP-2 termination plug.
LPA500
The LPA500 is a Log Periodic Antenna that provides 5dB of gain in the direction it is pointed. A microphone stand adapter and universal mounting clamp are included as well as a 10 foot antenna cable.
RMD Dual Rack Mount Kit
The RMD rack mount kit includes all of the screws and brackets required to rack mount two RE-2 or RE-1 (CSR-1000) receivers side by side in one rack space. Add the FMCK front mount cable kit to mount all four antennas in the same single rack space.
RMS Single Rack Mount Kit
The RMS rack mount kit includes all of the screws and brackets you need to mount an RE-2 or RE-1 (CSR-1000) receiver.